Primary DNS server DNS (P)
Secondary DNS server DNS (S)
Use this parameter to specify the IP address of the primary and secondary DNS (Domain Name System) servers.
Note
If you have only one DNS address, enter the DNS address in “DNS (P)”. If you have two or more DNS addresses, enter one of them in “DNS (P)” and another in “DNS (S)”.
1Press u/ don the remote control repeatedly and then press ENTER to select and enter the desired network parameter.
Note
When “DHCP” is set to “ON”, you cannot select and adjust any other network settings. To specify the other parameters, you need to first set “DHCP” to “OFF”.
2To specify the parameter, press u/ drepeatedly to change the number and press j/ ito select the digit to change.
3Press ENTER to confirm the parameter.
4Repeat steps 1 through 3 to configure each network parameter.
5Select “SET” and then press ENTER to finish configuration.
Note
In case you have changed your network configuration, you may need to reconfigure the network settings again.
y
You can reset the network settings of this unit to the initial factory settings by using
SET MENU
■Playback styles B)PLAY STYLE
Use this feature to adjust the playback style according to your preference. You can shuffle songs in a random order or repeat one specific song or a sequence of songs.
B)PLAY STYLE
.REPEAT;;;;;;;OFF SHUFFLE;;;;;;OFF
[]/[]:Up/Down
[<]/[>]:Select
Repeat REPEAT
Use this feature to set this unit to repeat one song or a sequence of songs.
Choices: OFF, SINGLE, ALL
•Select “OFF” to deactivate this feature.
•Select “SINGLE” to set this unit to repeat one song.
•Select “ALL” to set this unit to repeat a sequence of songs.
Notes
•When “REPEAT” is set to a setting other than “OFF”, the highlighted letter “R” appears in the top right corner of the playback status screen while one song or a sequence of songs are being repeated.
•If “REPEAT” is set to “SINGLE”, the setting will be reset to “OFF” when both the main zone and Zone 2 are turned off.
Shuffle SHUFFLE
Use this feature to set this unit to play songs or albums in a random order.
Choices: OFF, ON
•Select “OFF” to deactivate this feature.
•Select “ON” to set this unit to play songs or albums in a random order.
Note
When “SHUFFLE” is set to “ON”, the highlighted letter “S” appears in the top right corner of the playback status screen while songs or albums are being shuffled.
OPERATION | ADVANCED |
|
|