■Dynamic range F)DYNAMIC RANGE
Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding Dolby Digital and DTS signals.
F)DYNAMIC RANGE
.SP:MINSTD>MAX
HP:MINSTD>MAX
[]/[]:Up/Down [<]/[>]:Select
Speaker SP
Adjusts the speaker compression.
Headphone HP
Adjusts the headphone compression.
Choices: MIN, STD, MAX
•Select “MIN” (minimum) if you regularly listen at low volume levels.
•Select “STD” (standard) for general use.
•Select “MAX” (maximum) to preserve the greatest amount of dynamic range.
SET MENU
■Audio settings G)AUDIO SET
Use this feature to adjust the overall audio settings of this unit.
G)AUDIO SET
.MUTING TYPE;FULL
AUDIO DELAY;;0ms
TONE BYPASS;AUTO
[]/[]:Up/Down
[<]/[>]:Select
Muting type MUTING TYPE
Use this feature to adjust how much the mute function reduces the output volume (see page 34).
Choices: FULL,
•Select “FULL” to completely mute all the audio output.
•Select
Audio delay AUDIO DELAY
Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Control range: 0 to 160 ms
Control step: 1 ms
Tone bypass TONE BYPASS
Use this feature to select whether audio output bypasses tone control circuitry when “TREBLE” and “BASS” are set to 0 dB (see page 33).
Choices: AUTO, OFF
•Select “AUTO” if you want signals to bypass tone control circuitry to provide the purest signal possible.
•Select “OFF” if you do not want signals to bypass tone control circuitry.
OPERATION | ADVANCED |
|
|