5Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level.

VOLUME

or VOLUME

Front panel

Remote control

6Press TONE CONTROL on the front panel repeatedly to select “TREBLE” or “BASS” and then rotate the PROGRAM selector to adjust the corresponding frequency response level.

PROGRAM

TONE CONTROL

NET

DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD

XM

USB

 

 

VOLUME

 

SP

 

 

 

A

 

dB

TREBLE

0dB

L R

•Select “TREBLE” to adjust the high-frequency response.

•Select “BASS” to adjust the low-frequency response.

Notes

•Speaker and headphone adjustments are stored independently.

•When “TONE BYPASS” is set to “AUTO” (see page 81), and “BASS” and “TREBLE” are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit.

•If you increase or decrease the high-frequency or low- frequency sound to an extreme level, the tonal quality of the front speakers may not match that of the other speakers.

•TONE CONTROL is not effective when the “DIRECT STEREO” mode (see page 39) is selected or when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 38).

PLAYBACK

7Rotate the PROGRAM selector on the front panel (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program.

The name of the selected sound field program appears in the front panel display and in the OSD.

See page 66 for details about sound field programs.

PROGRAM

Front panel

or

 

STEREO

MUSIC

ENTERTAIN

MOVIE

 

 

1

2

3

4

 

 

STANDARD

SELECT

EXTD SUR.

DIRECT ST.

 

 

5

6

7

8

 

 

SPEAKERS

ENHANCER

NIGHT

STRAIGHT

 

 

9

0

10

ENT.

 

 

 

 

 

EFFECT

 

 

Remote control

 

NET

DVR

V-AUX DTV/CBL pDVD

MD/CD-R TUNER CD XM

USB

 

 

 

 

VOLUME

 

SP

 

 

 

 

 

A

Sports

dB

 

TV

L R

Currently selected sound field program

Notes

•Choose a sound field program based on your listening preference, not merely on the name of the program.

•When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

•Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 38).

•Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs are applied.

•To display information about the currently selected input source in the OSD, see page 40 for details.

OPERATION

BASIC

 

 

33 En