OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD. Control range:
Control step: 1
Initial setting: 0
•Press jto raise the position of the OSD.
•Press ito lower the position of the OSD.
Gray back GRAY BACK
Use this feature to display a gray background in the OSD when there is no video signal being input.
Choices: AUTO, OFF
•Select “AUTO” to display a gray background in the OSD when there is no video signal being input.
•Select “OFF” not to display any background in the OSD.
Notes
•Depending on the video signals being input or the system setting of your video monitor (NTSC or PAL), the OSD may be displayed abnormally. In such cases, set “GRAY BACK” to “OFF”.
•Even when “GRAY BACK” is set to “OFF”, the OSD may not be displayed correctly depending on the conditions of the picture.
On-screen display time ON SCREEN
Use this feature to set the amount of time to display the XM Satellite Radio information, iPod menu or NET/USB menu in the OSD after you perform a certain operation. Choices: ON, 10s, 30s
•Select “ON” to display the OSD unceasingly during an operation.
•Select “10s” to turn off the OSD 10 seconds after you perform a certain operation.
•Select “30s” to turn off the OSD 30 seconds after you perform a certain operation.
SET MENU
Front panel display scroll FL SCROLL
Use this feature to set whether to display the information (such as song title or channel name) in the front panel display in a continuous manner or by the first 14 alphanumeric characters after scrolling all characters once when “XM”, “DOCK” or “NET/USB” is selected as the input source.
Choices: CONT, ONCE
•Select “CONT” to display the operation status in the front panel display in a continuous manner.
•Select “ONCE” to display the operation status in the front panel display by the first 14 alphanumeric characters after scrolling all characters once.
■Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON
B)MEMORYGUARD
>OFFON
[<]/[>]:Select
[ENTER]:Return
•Select “OFF” to turn off the “MEMORY GUARD” feature.
•Select “ON” to protect:
–DSP program parameters
–all “SET MENU” items
–all speaker levels
Note
When “MEMORY GUARD” is set to “ON”, you cannot select and adjust any other “SET MENU” items.
OPERATION | ADVANCED |
|
|