Yamaha RX-N600 31 En, YES, PREPARATION, 11Press ENTER to confirm your selection, 10Press j/ i to select the desired setting, 13Press SET MENU to exit from “BASIC SETUP”

10Press j/ i to select the desired setting.

	PRESET/CH	;BASIC SETUP
		ROOM:	S >M L
		SUBWOOFER;;;;YES
	ENTER	SPEAKERS;;;;6spk
		SETUP:>OK CANCEL
A-E/CAT.	A-E/CAT.	. CHECK OK?;;;;YES

[<]/[>]:Select

Choices: YES, NO

•Select “YES” to complete the setup procedure if the test tone levels from each speaker were satisfactory.

•Select “NO” to proceed to the speaker level adjustment menu in step 12 to balance the output level of each speaker.

11Press ENTER to confirm your selection.

PRESET/CH

ENTER

A-E/CAT.A-E/CAT.

•If you selected “YES” in step 10, the setup procedure is completed and the display returns to the top “SET MENU” display.

•If you selected “NO” in step 10, the speaker level adjustment display appears in the front panel display.

BASIC SETUP

12Press u/ dto select a speaker and then j/ i to adjust the balance.

The selected speaker and the front left speaker (or the surround left speaker) output a test tone in turn.

•Press ito increase the value.

•Press jto decrease the value.

PRESET/CH

;BASIC SETUP

		-__________+
		. FR;;;;;;;;;;
	ENTER	C;;;;;;;;;;
		SL;;;;;;;;;;
A-E/CAT.		A-E/CAT.

•Select “FR” to adjust the balance between the front left and right speakers.

•Select “C” to adjust the balance between the front left and center speakers.

•Select “SL” to adjust the balance between the front left and surround left speakers.

•Select “SB” to adjust the balance between the surround left and surround back speakers.

•Select “SR” to adjust the balance between the surround left and surround right speakers.

•Select “SWFR” to adjust the balance between the front left speaker and the subwoofer.

13Press SET MENU to exit from “BASIC SETUP”.

SET MENU

MENU

SRCH MODE

PREPARATION

31 En