6ENHANCER

Turns on or off the Compressed Music Enhancer mode (see page 37).

7LEVEL

Selects the speaker channel to be adjusted and sets the output level (see page 36).

8Cursor buttons u / d / j / i, ENTER

Select and adjust the sound field program parameters or the “SET MENU” parameters.

9RETURN

Returns to the previous menu level when adjusting the “SET MENU” parameters.

0TRANSMIT indicator

Flashes while the remote control is sending infrared signals.

ASTANDBY

Sets this unit to the standby mode (see page 28).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

BPOWER

Turns on this unit (see page 28).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

CSLEEP

Sets the sleep timer (see page 35).

DMULTI CH IN

Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. (see page 38).

EVOLUME +/–

Increases or decreases the volume level.

FComponent selector switch

Selects the operation mode of the remote control buttons in the shaded area.

AMP

Operates this unit.

SOURCE

Operates the component selected with an input selector button (see page 94).

TV

Operates the TV assigned to either DTV/CBL or (see page 93).

CONTROLS AND FUNCTIONS

Notes

•To set the remote control codes for other components, see page 95.

•When you set the remote control codes for both DTV/CBL and

(see page 95), priority is given to the one set for DTV/ CBL.

GMUTE

Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 34).

HSTRAIGHT (EFFECT)

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 39).

INIGHT

Turns on or off the night listening modes (see page 34).

JSET MENU

Enters “SET MENU” (see page 76).

KDISPLAY

Selects the on-screen display (OSD) mode for your video monitor (see page 41).

LNetwork and USB input selector buttons

Select the sub input source of NET/USB (see page 103).

PC/MCX

Selects a PC server or YAMAHA MCX-2000 as the sub input source of NET/USB.

NET RADIO

Selects the Internet radio as the sub input source of NET/USB.

USB

Selects a USB memory device or a USB portable audio player as the sub input source of NET/USB.

Notes

•Press NET/USB to select “NET/USB” as the input source before you press any of the network and USB input selector buttons stated above to select the corresponding sub input source of NET/USB.

•When you press any of the network and USB input selector buttons, the contents previously played for the corresponding sub input source of NET/USB is automatically played.

INTRODUCTION

7 En