■Connecting the speaker cable
1Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits.
10 mm (0.4 in)
CONNECTIONS
■Connecting the banana plug
(except Europe model)
The banana plug is a
Banana plug
1 Tighten the knob.
2Loosen the knob.
PREPARATION
Red: positive (+)
Black: negative
3Insert one bare wire into the hole on the side of each terminal.
Red: positive (+)
Black: negative
2Insert the banana plug connector into the end of the corresponding terminal.
4Tighten the knob to secure the wire.