2S400 & S600 User’s Guide

Site Requirements

CAUTION: To insure that the printer has proper ventilation and cooling, do not place any padding or cushioning material under the unit, because this restricts air flow.

This printer may be installed on any solid, level surface of sufficient size and strength to accommodate the physical dimensions and weight of the unit. The area enclosure in which the printer will operate must meet the environmental conditions specified. Electrical power must be available and in close proximity to the printer.

Since this printer was designed and is fabricated as an industrial-type unit, it will function satisfactorily in areas such as warehouses, factory floors, and office environments that conform to specified environmental and electrical conditions.

Introduction to Printers

The first thing you want to do is identify your printer. This makes certain tasks -- such as media loading -- much easier to do!

If your printer looks like this (Figure 1), it is set up for Tear-Off mode. Tear-Off allows you to tear away each label, or a strip of labels, after it is printed.

To load media, refer to “Loading the Media -- Tear-Off Mode” in Getting Ready to Print.

Figure 1