S400 & S600 User’s Guide

7

 

 

Loading the Media

Media widths and thicknesses vary between applications. To maintain print quality from one application to another, refer to “Print Quality Adjustments” in Routine Care and Adjustments.

NOTE: Zebra recommends using media that is outside wound (you can see the labels on the outside of the roll).

Tear-Off Mode

1.Refer to Figure 7. Move the head open lever (a) counterclockwise to the open position to raise the printhead (b).

2.Slide the media guide (c) and the media supply guide (d) as far out from the printer frame as possible.

If you are loading roll media in Tear-Off mode, follow steps 3-5. For loading fanfold media in Tear-Off mode, skip to step 6.

3.Place the media roll on the media supply hanger (e), and thread the me- dia through the printhead assembly as shown.

a

b

d

e

c

Figure 7