46Operations Load Media

Roll Media (Continued)

e.Slide in the media supply guide until it touches the edge of the roll.

Fanfold Media (Continued)

e.Slide in the media supply guide until it touches the edge of the media.

4.Feed the media under the dancer assembly (1), the upper media sensor (2), and the ribbon sensor (3). Slide the media back until it touches the inside back wall of the upper media sensor.

3 2 1

5.Continue with the final instructions for the desired print mode. The print mode must be compatible with the media being used and the printer options installed. See Print Mode Descriptions and Printer Requirements on page 40 for more information.

•Additional Steps for Tear-Off Mode on page 47

•Additional Steps for Peel-Off Mode (with or without Liner Take-Up)on page 48

•Additional Steps for Cutter or Delayed Cut Mode on page 53

•Additional Steps for Rewind Mode on page 54

 

 

 

79695L-003

Z Series®/RZ™ Series User Guide

1/11/11