Configuration 95

Standard Control Panel Parameters

Table 11 • Printer Parameters (Page 23 of 25)

 

Language/Parameter

Action/Explanation

 

 

 

ZPL only

Select Format Convert

 

 

Selects the bitmap scaling factor. The first number is the original dots per

 

 

 

 

inch (dpi) value; the second, the dpi to which you would like to scale.

 

 

Default Value: NONE

 

 

Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

Select Idle Display

This parameter selects the LCD options for the real-time clock.

Note • If the default value is not selected, pressing PLUS (+) or

MINUS (-)briefly displays the firmware version of the printer.

Default Value: FIRMWARE (FW) VERSION

Selections: MM/DD/YY (24HR), MM/DD/YY (12HR), DD/MM/YY (24HR), DD/MM/YY (12HR), FW VERSION

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

 

 

 

1/11/11

Z Series®/RZ™ Series User Guide

79695L-003