Zebra Technologies ZM600, RZ400, RZ600, ZM400 Remove Used Ribbon, To remove used ribbon, complete these steps:, To loosen the ribbon, squeeze it against the ribbon

62Operations Load Ribbon

Remove Used Ribbon

To remove used ribbon, complete these steps:

1.Caution • Do not cut the ribbon directly on the ribbon take-up spindle. Doing so may damage the spindle.

If the ribbon has not run out, cut or break it before the ribbon take-up spindle (1).

1

2.To loosen the ribbon, squeeze it against the ribbon take-up spindle tension blades (1). At the same time, turn the ribbon take-up spindle release knob counterclockwise (2).

The tension blades collapse into the ribbon take-up spindle, loosening the ribbon.

1

2

3.Slide the used ribbon off of the ribbon take-up spindle and discard.

79695L-003 Z Series®/RZ™ Series User Guide 1/11/11