76Configuration

Standard Control Panel Parameters

Table 11 • Printer Parameters (Page 4 of 25)

Language/Parameter Action/Explanation

Select Print Mode

This parameter tells the printer how printed labels will be removed. Make sure that you select a print mode that is compatible with your printer and printer options. For information about how the print modes work with different printer options, see Print Modes and Printer Options on page 40.

Default Value (non-RFID printers): TEAR-OFF

Selections (non-RFID printers): TEAR-OFF,PEEL-OFF, CUTTER,

DELAYED CUT, LINERLESS-P, LINERLESS-R, LINERLESS-T,

REWIND

Default Value (RFID printers): RFID MODE

Selections (RFID printers): TEAR-OFF,PEEL-OFF, CUTTER,

DELAYED CUT, LINERLESS-P, LINERLESS-R, RFID MODE,

LINERLESS-T, REWIND

Note • The linerless selections apply only to printers that have the

Linerless option.

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

Set Media Type

This parameter tells the printer the type of media that you are using (see Types of Media on page 34 for more information). Selecting continuous media requires that you include a label length instruction in your label format (^LLxxxx if you are using ZPL or ZPL II).

When non-continuous media is selected, the printer feeds media to calculate label length (the distance between two recognized registration points of the inter-label gap, webbing, or alignment notch or hole).

Default Value: GAP/NOTCH

Selections: GAP/NOTCH, MARK, CONTINUOUS

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

 

 

 

79695L-003

Z Series®/RZ™ Series User Guide

1/11/11