Zenoah PSJ2300 Kickback and Pinching Safety Precautions Beware of kickback, Beware of pinching

English	中 文
4. Safety precautions	4. 正确使用须知

and fix the unit by ropes.

4.Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during transport.

■Kickback and Pinching Safety Precautions

Beware of kickback!

Kickback can occur whenever the tip of the guide bar touches an object while the saw is operating. Kickback may force the bar up and back toward the operator with lightning-like speed!

Beware of pinching.

Pinching the saw along the tip of the guide bar may force the bar back rapidly toward the operator. Pinching can occur whenever wood closes in around the moving chain.

WARNING

Both kickback and pinching may cause you to lose control of the pole pruner which could result in serious personal injury. Do not rely exclusively on the safety device built into the pruner! You must take several steps to keep your jobs free from accident or injury:

1. Understand kickback and pinching! You can reduce or eliminate the element of surprise. Sudden surprises contributes to accidents.

2.Keep a firm grip on the pole pruner with both hands whenever the engine is running. A firm grip will help you reduce the affects of kickback and pinching as well as maintain control of the machine.

3.Make sure the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, or any other obstructions which could be hit while you operation the pole pruner.

4.Cut at high engine speeds.

5.Follow the manufacturer's instructions for sharpening and maintaining the chain.

6.Use only the replacement bar and chain or equivalent as specified by

4.切勿在燃料箱中尚存燃料的情况下 使用车辆在长距离粗糙路面上运输本 产品。否则燃料可能会在运输时从燃 料箱中泄漏。

■有关反弹和卡滞的安全注意事项

小心反弹！

电锯运转时，如果导向条的顶端触碰到 了物体，则会发生反弹。反弹可能会使 导向条以闪电般的速度往上或往后弹向 操作者。

小心卡滞。

锯片沿着导向条顶端被卡住，可能会使 导向条快速向后弹向操作者。当木料夹 住运行的链条时会发生卡滞现象。

警 告

反弹和卡滞都会导致长柄修枝剪失控， 从而可能导致严重的人身伤害。请勿完 全依赖于修枝剪中内置的安全装置！你 必须做到以下几点以避免发生意外或伤 害事故：

1.了解什么是反弹和卡滞！这样可以减 少或消除发生反弹和卡滞时的恐慌。 这种突然的恐慌只会增加事故伤害的 几率。

2.引擎运转时请务必用双手牢牢紧握 长柄修枝剪。此举有助于减少反弹和 卡滞的影响，并可确保对机器的有效 控制。

3.请务必确保您进行切割的区域没有 障碍物。请勿让导向条的前端接触到 木头、树枝或其它可能在操作长柄修 枝剪时碰到的障碍物。

4.以较高的引擎速度进行切割。

5.打磨和保养链条时请遵照制造商的 说明。

6.请仅使用制造商指定的备用导向条 和链条或同等产品。

11