Alphabetical Reference | Parameter reference |
CLKSRC
Clocking source for T1 line. Possible values are:
•WAN1: Clock for the T1 interface derived from the line receive signal.
•WAN2
•INTERNAL: Clocking received from internal 1.544Mhz Stratum 4 clock.
If the external clock fails, the unit switches to the internal clock. When the external clock is restored, the unit switches back to the external clock source.
Configuration group: T1CFG
Syntax: (GET/SET) T1CFG:CLKSRC:x:(WAN1/WAN2/INTERNAL)
CODE
T1 line encoding. Possible values are:
•B8ZS
•AMI
Configuration group: T1CFG
Syntax: (GET/SET) T1CFG:CODE:x:(B8ZS/AMI)
CTS
The Clear To Send (CTS) setting controls when data is sent. Some DTE equipment must receive a CTS signal before transmitting data. Possible values are:
•ON:
•OFF (default):
•AUTO:
Configuration group: DPCFG
Syntax: (GET/SET) SET DPCFG:CTS:1:(ON/OFF)
CTSDELAY
The Clear To Send (CTS) Delay setting delays changes in the CTS signal in the local mode. Enter the value you need in milliseconds. If you do not know what value you need, start with 0 (zero) ms and increase the value gradually until you no longer experience problems. The CTS option above must be set to ON before the CTS DELAY setting has any effect.
Zhone Technologies /
