Alphabetical Reference | Parameter reference |
DSR
The Data Set Ready (DSR) option allows you to define whether the V.35 port DSR control lead should be held on (high) or off (low).
Possible values are:
•ON:
•OFF (default):
Configuration group: DPCFG
Syntax: (GET/SET) DPCFG:DSR:1:(ON/OFF)
ERRINS
Specifies that random bits are inserted while the BERT test is active for the entire T1. The only supported value is BIT.
Configuration group: T1CFG
Syntax: (GET/SET) T1BE:ERRINS:X:BIT
ES
The ES (errored seconds) option indicates the total number of seconds in which one or more frames with
Configuration group: PMCUR, PMTOT, PMINT, FARPMCUR,FARPMTOT, FARPMINT
Syntax: GET (PMCUR, PMTOT, FARPMCUR, FARPMTOT):ES:x
Syntax: GET (PMINT,
FDL
Type of FDL. Possible values are:
•ANSI
•ATT
•OFF (default)
Notes
•This setting is only required if FRAME is set to ESF.
Zhone Technologies /