Zhone Technologies Z-PLEX-10-24-DOC-SC manual Trcntrl FXS, Trnkc FXO, Trnkc FXS

Alphabetical Reference Parameter reference

•LOOP: Tip and Ring leads are tied together.

•OPEN: Ring lead is not connected to either the Tip or to ground.

•RING_GND: the Ring lead is grounded.

Configuration group: FXOCFG

TRCNTRL (FXS)

The Tip and Ring Control specifies the tip and ring leads of the FXS port from the perspective of the system.

Possible values are:

•TgRb (Tip lead is grounded and -48V is applied to the Ring lead)

•ToRb (Tip lead is open and -48V is applied to the Ring lead)

•TbRg (-48V is applied to the Tip lead and the Ring lead is grounded)

•RING (the ringing voltage is applied between tip and ring)

Configuration group: TXSTST

Syntax: (GET/SET) TXSTST:TRCNTRL:n:(TgRb/ToRb/TbRg/RING)

TRNKC (FXO)

The Trunk conditioning setting specifies whether the FXO port should send the idle pattern to the network upon declaration of a Carrier Group Alarm (CGA) on the WAN link to which the port is assigned. In most cases, leave the trunk conditioning setting at its default setting.

Possible values are:

•OFF (default)

•ON

Configuration group: FXOCFG

Syntax: (GET/SET) FXOCFG:TRNKC:n:(OFF, ON)

TRNKC (FXS)

The Trunk conditioning setting specifies whether the FXS port should send the idle pattern to the network upon declaration of a Carrier Group Alarm (CGA) on the WAN link to which the port is assigned. In most cases, leave the trunk conditioning setting at its default setting.

Possible values are:

Zhone Technologies / A-23