Zhone Technologies Z-PLEX-10-24-DOC-SC manual Chapter Configuring the ZPlex, Chapter Diagnostics

Contents

	3.4	Alarm	3-5
	3.5	Grounding requirements	3-6
	3.6	Cabling	3-6
Chapter 4	Configuring the ZPlex
	4.1	Using the command line interface	4-1
	4.2	Quick start system configuration	4-2
	4.2.1	Logging in and out of the system	4-4
	4.2.2	Setting the date	4-4
	4.2.3	Configuring a management interface	4-4
	4.2.4	Configuring system contact information	4-6
	4.3	Configuring SNMP	4-6
	4.4	Configuring T1 interfaces	4-7
	4.5	Configuring a T1 drop and insert interface	4-8
	4.6	Configuring FXS ports	4-8
	4.7	Configuring FXO ports	4-9
	4.8	Configuring the V.35 data port	4-10
	4.9	Adding and deleting routes	4-11
	4.9.1	Adding and deleting network routes	4-11
	4.9.2	Adding and deleting host routes	4-12
	4.9.3	Displaying routes	4-12
	4.9.3.1	Displaying host routes	4-13
	4.9.3.2	Displaying network routes	4-13
	4.10	Miscellaneous commands	4-14
	4.10.1	Rebooting the system	4-14
	4.10.2	Displaying flash information	4-14
	4.10.3	Displaying timeslot usage	4-14
	4.10.4	Displaying list of alarms	4-14
	4.10.5	Displaying and clearing list of history alarms	4-15
Chapter 5	Diagnostics
	5.1	T1 loopbacks	5-1
	5.2	BER testing	5-3
	5.2.1	Activating a BER test for an entire T1 line	5-3
	5.2.2	Activating a BER test for individual timeslots	5-3
	5.3	Data port loopback	5-4
	5.4	FXO/FXS ports loopbacks	5-5
	5.4.1	Configuring FXO loopbacks	5-6
	5.4.2	Configuring FXS loopbacks	5-6
	5.5	LED Indicators	5-7
	5.5.1	Ethernet LED	5-7
	5.5.2	T1 LEDs	5-7

viii\ Zhone Technologies