Parameter reference | Alphabetical Reference |
RTLP (FXS)
The RTLP setting controls the amount of gain or loss added to the incoming signal after it is decoded to analog. To increase the signal level, set the RTLP setting to a positive value (the larger the number, the more gain is added). To decrease the signal level, set the RTLP setting to a negative value (the more negative the number, the more the signal level is decreased).
For example, an incoming signal at
Configuration group: FXSCFG
Syntax: (GET/SET)
RxAB (FXO)
The RxAB setting is a
•00
•01
•10
•11
Configuration group: FXOTST
Syntax: GET FXOTST:RXAB:n
RxAB (FXS)
The RxAB setting is a
Possible values are:
•00
•01
•10
•11
Configuration group: FXSTST
Syntax: GET FXSTST:RXAB:n