ZyXEL Communications 128 user manual Bridge Ethernet Setup

Figure 9-1 Bridge Ethernet Setup

∙Handle IPX - Set this parameter to None if there is no IPX traffic on the LAN or if you do not want to apply any special handling for IPX. Set it to Client if there are only client workstations on the LAN. Set to Server if there are only IPX servers on the LAN.

If there are both clients and servers on the LAN, then the setting depends on if the local clients will access the remote servers. If they do, set to Client and set Dial-On-Broadcast in menu 11.2 to Yes to allow the client queries to trigger the call. If they do not, set it to Server.

When you are finished, press ENTER at the message: Press ENTER to Confirm ... to save your selections, or press ESC at any time to cancel them.

LAN-to-LAN Application

A typical LAN-to-LAN application is to use the Prestige to call from one office to another office such that stations on one network have access to stations on the remote side and vice versa. You will

90 Bridging Configuration