82 Novell IPX Configuration
Once you have completed filling in the Menu 3.3, press ENTER
the save message to save your selections, or press ESC at any time
to cancel your selections.
LAN-to-LAN Application
A typical LAN-to-LAN application is to use the Prestige to call
from a branch office to headquarters such that all of the stations on
the branch office network have access to the server at the
headquarters, as depicted in the following diagram:
Figure 8-3 LAN-to-LAN application
For the branch office, you need to configure a Remote Node in
order to dial out to headquarters.
Remote Node Se tup
Follow the procedure in Chapter 5 to fill the protocol-independent
parameters in Menu 11, Remote Node Profile. For the protocol-
dependent parameters, follow the ensuing instructions. If the
Prestige is configured to receive an incoming call, you can
configure the default dial-in parameters in menu 13 (see Chapter
6).