ZyXEL Communications 128 user manual Connecting an Ethernet Cable to your Prestige, ∙ Utp

normal phone line. It should be noted that this is optional and is not required for you to run other applications using your Prestige.

Plug one end of the telephone cord from a phone, fax, or modem into the socket on the rear panel of the Prestige labeled PHONE 1 or PHONE 2.

In order to receive incoming calls using a device connected to PHONE ports, you need to enter Phone1 or Phone2 in the Analog Call field under the desired telephone number (e.g., 1st phone #) in SMT Menu 2 - ISDN Setup. See Collecting ISDN Phone Line Information in Chapter 2 for more details.

Connecting an Ethernet Cable to your Prestige

The Prestige supports two types of Ethernet connections. The connection procedure differs for each one; follow the one that is appropriate for your installation.

∙UTP

The UTP port is used to connect to a 10Base-T network. 10Base-T networks use Unshielded Twisted Pair (UTP) cable and RJ-45 connectors that look like a bigger telephone plug with 8 pins. Two types of gray Ethernet cables come with the package:

∙Straight through cable (white tag): Connect your Prestige to a 10Base-T hub.

∙Crossover cable (red tag): Connect your Prestige to your computer directly without a hub.

2￿127(￿ ,)￿7+,6￿&$%/(￿,6￿86('￿72￿&211(&7￿,6'1￿￿,7￿0$<￿'$0$*(￿<285￿35(67,*(￿

∙AUI

The AUI port (the connector with 15 pins) is used to connect the Prestige to a 10Base5 (thicknet) network.

Installation 23