4.Pri(mary) Phone # and Sec(ondary) Phone Number - Both the Primary and the Secondary Phone number refer to the number that the Prestige will dial to connect to the ISP. The Prestige will always call your ISP using the Primary Phone number first. If the Primary Phone number is busy or does not answer, the Prestige will call the Secondary Phone number if available. Once connected, the Prestige will use the BACP (Bandwidth Allocation Control Protocol) to establish the second
5.My Login Name - Enter the login name given to you by your ISP.
6.My Password - Enter the password associated with the login name above. Note that this login name/password pair is only for the Prestige to connect to the ISP’s gateway. When you use TCP/IP applications, e.g., FTP, to access the Internet from your workstation, you will need a separate login name and password for each server.
7.Single User Account - See the following section for a more detailed discussion on the Single User Account feature. The default is No.
8.Telco Options: Transfer Rate - This field (which only applies to outgoing calls) controls the rate at which the data is transferred between your Prestige and the Internet. The options for this field are:
∙64K - The Prestige will place 64Kbps (bits per second) digital data calls.
∙56K - (For the North America only) The Prestige will place 56Kbps digital data calls.
∙DOVBS - (For the North America only) The Prestige will place 56Kbps Data Over Voice Bearer Service (DOVBS)
