![](/images/new-backgrounds/1142863/14286375x1.webp)
ETHERNET: TX and RX - Transmit and Receive LEDs will blink to indicate when there is traffic on the LAN.
ETHERNET: COL - Indicates that there is transmission collision over the LAN.
PHONE: 1 - Indicates the functionality of the POTS port 1 on the Prestige. If there is a device plugged into this port, and the device is in use, this LED should be on.
PHONE: 2 - Indicates the functionality of the POTS port 2 on the Prestige. If there is a device plugged into this port, and the device is in use, this LED should be on.
Powering On Your Prestige
When you power on your Prestige, the Prestige will perform several internal tests and will also do an ISDN line initialization. After this initialization, the Prestige will ask you to press ENTER to continue as shown below:
Figure 3-3 Power on Messages
If you press ENTER, the Prestige will display a login screen and ask you to enter the password as shown below:
Installation 25