Prestige 791R G.SHDSL Router
Step 2. Move the cursor to the Edit IP/IPX/Bridge field, press [SPACE BAR] to select Yes and then
press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options. Use the space
bar to toggle through the selections for NAT and choose the option you want.
Menu 11.3 - Remote Node Network Layer Options
|
| IP Options: | Bridge Options: |
|
| |
|
| IP Address Assignment = Dynamic | Ethernet Addr Timeout(min)= N/A |
|
| |
|
| Rem IP Addr = 0.0.0.0 |
|
|
|
|
|
| Rem Subnet Mask= 0.0.0.0 |
|
|
|
|
|
| My WAN Addr= N/A |
|
|
|
|
|
| NAT= SUA Only |
|
|
|
|
|
| Address Mapping Set= N/A |
|
|
|
|
|
| Metric= 2 |
|
|
|
|
|
| Private= No |
|
|
|
|
|
| RIP Direction= None |
|
|
|
|
|
| Version= |
|
|
|
|
|
| Multicast= None |
|
|
|
|
|
| IP Policies= |
|
|
|
|
|
| Enter here to CONFIRM or ESC to CANCEL: |
|
| ||
|
|
|
|
|
| |
|
| Figure |
|
| ||
|
| Table |
|
| ||
|
|
|
| |||
FIELD | DESCRIPTION |
| EXAMPLE | |||
|
|
|
| |||
NAT | Press [SPACE BAR] and then [ENTER] to select Full Feature if you |
| Full Feature | |||
|
| have multiple public WAN IP addresses for your Prestige. The SMT |
|
|
| |
|
| uses the address mapping set that you configure and enter in the |
|
|
| |
|
| Address Mapping Set field (menu 15.1 - see section 11.3.1). |
|
|
| |
|
| Select None to disable NAT. |
|
| None | |
|
|
|
|
| ||
|
| When you select SUA Only, the SMT uses Address Mapping Set 255 |
| SUA Only | ||
|
| (menu 15.1 - see section 11.3.1). Choose SUA Only if you have just |
|
|
| |
|
| one public WAN IP address for your Prestige. |
|
|
| |
|
|
|
|
|
|
|
11.3 NAT Setup
Use the Address Mapping Sets menus and submenus to create the mapping table used to assign global addresses to computers on the LAN. You can see two NAT Address Mapping sets in menu 15.1. You can only configure Set 1. Set 255 is used for SUA. When you select Full Feature in menu 4 or 11.3, the
NAT |