Prestige 791R G.SHDSL Router
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu allows you to configure a policy rule.
| Menu 25.1.1 - IP Routing Policy | ||
Policy Set Name= test |
| ||
Active= Yes |
|
|
|
Criteria: | = | 6 |
|
IP Protocol | Packet length= 40 | ||
Type of Service= | Normal | ||
Precedence | = | 0 | Len Comp= N/A |
Source: |
|
| end= 1.1.1.1 |
addr start= 1.1.1.1 | |||
port start= | 20 |
| end= 20 |
Destination: |
|
| end= 2.2.2.2 |
addr start= 2.2.2.2 | |||
port start= | 20 |
| end= 20 |
Action= Matched | = 192.168.1.1 | Log= No | |
Gateway addr | |||
Type of Service= Max Thruput |
| ||
Precedence | = | 0 |
|
| Press ENTER to Confirm or ESC to Cancel: | ||
Press Space Bar to Toggle. |
|
|
|
| Figure |
| Table |
|
|
FIELD | DESCRIPTION |
|
|
Policy Set Name | This is the policy set name assigned in Menu 25 – IP Routing Policy Setup. |
|
|
Active | Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to |
| deactivate the policy. Inactive policies are displayed with a minus sign |
| SMT menu 25. |
|
|
Criteria |
|
|
|
IP Protocol | IP layer 4 protocol, for example, UDP, TCP, ICMP, etc. |
|
|
Type of Service | Prioritize incoming network traffic by choosing from Don’t Care, Normal, Min |
| Delay, Max Thruput, Min Cost or Max Reliable. |
Precedence | Precedence value of the incoming packet. Press [SPACE BAR] and then |
| [ENTER] to select a value from 0 to 7 or Don’t Care. |
Packet Length | Type the length of incoming packets (in bytes). The operators in the Len |
| Comp (next field) apply to packets of this length. |
Len Comp | Press [SPACE BAR] and then [ENTER] to choose from Equal, Not Equal, |
|
|
IP Policy Routing |