Prestige 791R G.SHDSL Router
5.2.2 Editing TCP/IP Options
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to open Menu 11.3 - Network Layer Options.
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT = None
Metric= 15
Private= No
RIP Direction= Both
Version=
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Figure 5-6 Remote Node Network Layer Options
Table 5-5 Remote Node Network Layer Options
FIELD | DESCRIPTION | EXAMPLE |
|
|
|
Rem IP | Leave this field set to 0.0.0.0 to have the ISP or other remote router | 0.0.0.0 |
Address | dynamically (automatically) send its IP address if you do not know it. | (default) |
| Enter the remote gateway’s IP address here if you know it (static). |
|
|
|
|
Rem IP | Leave this field set to 0.0.0.0 to have the ISP or other remote router | 0.0.0.0 |
Subnet | dynamically send its subnet mask if you do not know it. Enter the remote | (default) |
Mask | gateway’s subnet mask here if you know it (static). |
|
|
|
|
My WAN | Leave the field set to 0.0.0.0 to have the ISP or other remote router | 0.0.0.0 |
Addr | dynamically (automatically) assign your WAN IP address if you do not | (default) |
| know it. Enter your WAN IP address here if you know it (static). |
|
| This is the address assigned to your local Prestige, not the remote |
|
| router. |
|
|
|
|
NAT | Press [SPACE BAR] and then [ENTER] to select either Full Feature, | None |
| None or SUA Only. See the Network Address Translation (NAT) chapter | (default) |
| for a full discussion on this feature. |
|
|
|
|
Metric | Enter a number from 1 to 15 to set this route’s priority among the | 15 |
| Prestige’s routes. The smaller the number, the higher priority the route | (default) |
| has. |
|
|
|
|
Dial Backup |