Prestige 791R G.SHDSL Router

Table 18-1 Schedule Set Setup

FIELD

DESCRIPTION

EXAMPLE

 

 

 

How Often

Should this schedule set recur weekly or be used just once only?

Once

 

Press the [SPACE BAR] and then [ENTER] to select Once or

 

 

Weekly. Both these options are mutually exclusive. If Once is

 

 

selected, then all weekday settings are N/A. When Once is

 

 

selected, the schedule rule deletes automatically after the

 

 

scheduled time elapses.

 

 

 

 

Once:

If you selected Once in the How Often field above, then enter the

2000-01-01

Date

date the set should activate here in year-month-date format.

 

 

 

 

 

 

Weekday:

If you selected Weekly in the How Often field above, then select

Yes

Day

the day(s) when the set should activate (and recur) by going to that

No

day(s) and pressing [SPACE BAR] to select Yes, then press

 

 

 

[ENTER].

N/A

 

 

 

Start Time

Enter the start time when you wish the schedule set to take effect

09:00

 

in hour-minute format.

 

 

 

 

Duration

Enter the maximum length of time this connection is allowed in

08:00

 

hour-minute format.

 

 

 

 

Action

Forced On means that the connection is maintained whether or not

Forced On

 

there is a demand call on the line and will persist for the time period

 

specified in the Duration field.

 

 

Forced Down means that the connection is blocked whether or not

 

 

there is a demand call on the line.

 

 

Enable Dial-On-Demandmeans that this schedule permits a

 

 

demand call on the line. Disable Dial-On-Demandmeans that this

 

 

schedule prevents a demand call on the line.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.

Call Scheduling

18-3