Prestige 791R G.SHDSL Router
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
Filter # | This is the filter set, filter rule coordinates, for instance, 2, 3 refers to the | 5,1 |
| second filter set and the third rule of that set. |
|
|
|
|
Filter Type | Press [SPACE BAR] and then [ENTER] to select a type of rule. | Generic Filter |
| Parameters displayed below each type will be different. Choices are | Rule |
| Generic Filter Rule or TCP/IP Filter Rule. |
|
Active | Select Yes to turn on or No to turn off the filter rule. | No |
|
| (default) |
|
|
|
Offset | Type the starting byte of the data portion in the packet that you want to | 0 |
| compare. The range for this field is from 0 to 255. | (default) |
|
|
|
Length | Type the byte count of the data portion in the packet that you want to | 0 |
| compare. The range for this field is 0 to 8. | (default) |
Mask | Type the mask (in Hexadecimal) to apply to the data portion before |
|
| comparison. |
|
|
|
|
Value | Type the value (in Hexadecimal) to compare with the data portion. |
|
|
|
|
More | If Yes, a matching packet is passed to the next filter rule before an action | No |
| is taken or else the packet is disposed of according to the action fields. | (default) |
| If More is Yes, then Action Matched and Action Not Matched will be |
|
| N/A. |
|
Log | Select the logging option from the following: |
|
| None – No packets will be logged. | None |
| Action Matched – Only matching packets and rules will be logged. |
|
| Action Not Matched – Only packets that do not match the rule |
|
| parameters will be logged. |
|
| Both – All packets will be logged. |
|
Action | Select the action for a matching packet. Choices are Check Next Rule, | Check Next |
Matched | Forward or Drop. | Rule |
|
| (default) |
|
|
|
Action Not | Select the action for a packet not matching the rule. Choices are Check | Check Next |
Matched | Next Rule, Forward or Drop. | Rule |
|
| (default) |
|
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Filter Configuration |