Prestige 791R G.SHDSL Router

 

 

 

Menu 15.1.1.1 Address Mapping Rule

 

 

 

 

Type= One-to-One

 

 

 

 

Local IP:

 

 

 

 

Start=

 

 

 

 

End

= N/A

 

 

 

 

Global IP:

 

 

 

 

Start=

 

 

 

 

End

= N/A

 

 

 

 

Server Mapping Set= N/A

 

 

 

 

 

Press ENTER to Confirm or ESC to Cancel:

 

 

 

 

Press Space Bar to Toggle.

 

 

 

 

 

 

 

 

 

Figure 11-9 Editing/Configuring an Individual Rule in a Set

 

 

 

 

Table 11-6 Editing/Configuring an Individual Rule in a Set

 

 

 

 

 

 

 

 

 

FIELD

 

DESCRIPTION

 

EXAMPLE

 

 

 

 

 

 

Type

Press [SPACE BAR] and then [ENTER] to select from a total of five

 

One-to-One

 

 

types. These are the mapping types discussed in Table 11-2.

 

 

 

 

 

Server allows you to specify multiple servers of different types

 

 

 

 

 

behind NAT to this computer. See section 11.5.3 for an example.

 

 

 

Local IP

Only local IP fields are N/A for server; Global IP fields MUST be set

 

 

 

 

 

for Server.

 

 

 

 

Start

This is the starting local IP address (ILA).

 

0.0.0.0

End

This is the ending local IP address (ILA). If the rule is for all local

 

 

N/A

 

 

IPs, then put the Start IP as 0.0.0.0 and the End IP as

 

 

 

 

 

255.255.255.255. This field is N/A for One-to-One and Server types.

 

 

 

Global IP

 

 

 

 

 

Start

This is the starting global IP address (IGA). If you have a dynamic

 

0.0.0.0

 

 

IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start

 

 

 

 

 

can be set to 0.0.0.0 only if the types are Many-to-Oneor Server.

 

 

 

End

This is the ending global IP address (IGA). This field is N/A for One-

 

 

N/A

 

 

to-One,Many-to-One and Server types.

 

 

 

Server

Only available when Type is set to Server. Type a number from 1 to

 

 

 

Mapping Set

10 to choose a server set from menu 15.2.

 

 

 

 

 

 

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

NAT

11-13