Prestige 791R G.SHDSL Router

4.2.3 Transfer Rates

The Prestige supports the following symmetrical multi-rate data transmission speeds:

72, 136, 200, 264, 392, 520, 776, 1032, 1160, 1544, 1736, 2056 and 2312Kbps.

You can increase the capacity of the Internet connection (within certain limitations) without changing your ISP or buying new equipment.

For back-to-back applications make sure that your Prestige and its peer have the same Transfer Max Rate and the same Transfer Min Rate. Two (maximum and minimum) transfer rates are used to accommodate fluctuations in line speed. This is known as Dynamic Bandwidth Allocation.

4.2.4 Standard Mode

If your Prestige is a server, then select the mode that applies to your region: ANSI (American National Standards Institute) and ETSI (European Telecommunications Standards Institute). If your Prestige is a client, select the same Standard Mode that the server side selects. ANSI and ETSI create recommendations and standards for the telecommunications industry.

4.3WAN Setup Screen

From the main menu, enter 2 to open menu 2.

Menu 2 - WAN Setup

Service Type= Client

Rate Adaption= Enable

Transfer Max Rate(Kbps)= 2312

Transfer Min Rate(Kbps)= 2312

Standard Mode= ANSI(ANNEX_A)

Dial-Backup:

Active= No

Port Speed= 115200

AT Command String:

Init= at&fs0=0

Edit Advanced Setup= No

Press ENTER to Confirm or ESC to Cancel:

Figure 4-2 WAN Setup

WAN

4-3