ZyXEL Communications IPC-4605N Motion Detection, 4 I/O Status, Audio Detection, Recording Setup

6.7.3Motion Detection

Motion Detection allows you to define up to three regions that will trigger an event if motion is detected.

Select a region, sensitivity level (S1: Lowest ~ S5: Highest) from the dropdown list, and then click and drag on the video display to define the region. Click [Save] for settings to take effect.

6.7.4I/O Status

The I/O Status page displays the status of devices plugged into I/O ports.

6.7.5Audio Detection

The Audio Detection page allows you to define the threshold at which sound will trigger an event. The audio detection function on this IP camera works by measuring volume levels.

Sensitivity

Low

Medium

High

Trigger Threshold

Approx 65~70dB

Approx 80~85dB

Approx 100~105dB

6.8 Recording Setup

The IPC-4605N supports storage of both snapshots and video clips to local storage. To configure this function, navigate to [Setup] > [Recording Setup]. The following screen will appear.