6 Configuration
6.1 Video Settings
The Video Settings screen consists of all the basic settings options. To access the main setup page, click on the setup button at the top right in the live view screen. You can configure detailed settings of your IP camera here.
The following table describes the labels found on this screen.
Label | Description |
Turbo Picture | This mode provides best video quality, but frame rate |
| is limited to 15. |
Motion Adaptive | This mode provides 30FPS at a lower resolution |
Enable 2nd Stream | This enables the second stream for viewing from |
| mobile devices. |
| |
Resolution | Resolution settings. Options are QQVGA, QVGA, |
| VGA, and 1080x720 (720p) |
Codec | The codec used to encode video. |
| viewed from external devices, while H.264 uses less |
| bandwidth. |
