Chapter 2 Introducing the Web Configurator
User’s Guide
40
2.1.2 The Reset Button
If you forget your password or cannot access the web configurator, you will need
to use the Reset button to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the
password will be reset to “1234”.

2.1.2.1 Using The Reset Button

1Make sure the Power light is on (not blinking).
2To set the device back to the factory default settings, press the Reset button for
ten seconds or until the Power light begins to blink and then release it. When the
Power light begins to blink, the defaults have been restored and the device
restarts.
3Reconfigure the WiMAX Modem following the steps in your Quick Start Guide.