Chapter 6 The LAN Configuration Screens
User’s Guide 71
6.5 Other Settings
Click ADVANCED > LAN Configuration > Other Settings to set the RIP and
Multicast options.

Figure 23 ADVANCED > LAN Configuration > Advanced

The following table describes the labels in this screen.
Apply Click to save your changes.
Cancel Click to return to the previous screen without saving your changes.

Table 17 Management > Static Route > IP Static Route > Edit (continued)

LABEL DESCRIPTION

Table 18 ADVANCED > LAN Configuration > Other Settings

LABEL DESCRIPTION
RIP & Multicast Setup
RIP Direction Use this field to control how much routing information the WiMAX
Modem sends and receives on the subnet.
None - The WiMAX Modem does not send or receive routing
information on the subnet.
Both - The WiMAX Modem sends and receives routing information
on the subnet.
In Only - The WiMAX Modem only receives routing information on
the subnet.
Out Only - The WiMAX Modem only sends routing information on
the subnet.
RIP Version Select which version of RIP the WiMAX Modem uses when it sends or
receives information on the subnet.
RIP-1 - The WiMAX Modem uses RIPv1 to exchange routing
information.
RIP-2B - The WiMAX Modem broadcasts RIPv2 to exchange routing
information.
RIP-2M - The WiMAX Modem multicasts RIPv2 to exchange routing
information.