Chapter 7 The WAN Configuration Screens
User’s Guide
86
4In the DL Frequency [4] field, enter 2625000.
Leave the rest of the DL Frequency fields at zero. The screen appears as follows.
Figure 30 Completing the WiMAX Frequency Screen
5Click Apply. The WiMAX Modem stores your settings.
When the WiMAX Modem searches for available frequencies, it scans all
frequencies from DL Frequency [1] to DL Frequency [4]. When it finds an
available connection, the fields in this screen will be automatically set to use that
frequency.
7.4 Antenna Selection
Click ADVANCED > WAN Configuration > Antenna Selection to switch
between the WiMAX Modem’s internal antenna and the (optinoal) external
antennas, if they are installed.
Note: This screen only pertains to the MAX-216M1R plus. Other devices in this series
do not support external antennas.
Figure 31 ADVANCED > WAN Configuration > Antenna Selection
The following table describes the labels in this screen.
Table 23 ADVANCED > WAN Configuration > Advanced
LABEL DESCRIPTION
Select the Antenna Switch Mode
Use Internal
Antenna Select this to use the device’s internal antenna.
Use External
Antenna Select this to use the device’s external antenna. If you select this
option but do not have external antennas attached, you may
experience poor reception.
External antennas are optional and not required.