Chapter 7 LAN
7.3 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 56 LAN IP
The following table describes the labels in this screen.
Table 36 LAN IP
LABEL | DESCRIPTION |
LAN TCP/IP |
|
|
|
IP Address | Type the IP address of your ZyXEL Device in dotted decimal notation |
| 192.168.1.1 (factory default). |
|
|
IP Subnet Mask | The subnet mask specifies the network number portion of an IP address. Your |
| ZyXEL Device will automatically calculate the subnet mask based on the IP |
| address that you assign. Unless you are implementing subnetting, use the |
| subnet mask computed by the ZyXEL Device. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
7.4 LAN IP Alias
IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN network.
To change your ZyXEL Device’s IP alias settings, click Network > LAN > IP Alias. The screen appears as shown.
102 |
| |
ZyXEL |
| |
|
|
|