|
| Chapter 6 WAN |
| Table 34 PPTP Encapsulation | |
| LABEL | DESCRIPTION |
| First DNS Server | Select From ISP if your ISP dynamically assigns DNS server information (and |
| Second DNS Server | the ZyXEL Device's WAN IP address). The field to the right displays the (read- |
| Third DNS Server | only) DNS server IP address that the ISP assigns. |
| Select | |
|
| |
|
| DNS server's IP address in the field to the right. If you chose |
|
| but leave the IP address set to 0.0.0.0, |
|
| you click Apply. If you set a second choice to |
|
| same IP address, the second |
|
| Apply. |
|
| Select None if you do not want to configure DNS servers. If you do not |
|
| configure a DNS server, you must know the IP address of a computer in order |
|
| to access it. |
|
|
|
| WAN MAC Address | The MAC address section allows users to configure the WAN port's MAC |
|
| address by either using the ZyXEL Device’s MAC address, copying the MAC |
|
| address from a computer on your LAN or manually entering a MAC address. |
|
|
|
| Factory default | Select Factory default to use the factory assigned default MAC Address. |
|
|
|
| Clone the computer’s | Select Clone the computer's MAC address - IP Address and enter the IP |
| MAC address | address of the computer on the LAN whose MAC you are cloning. Once it is |
|
| successfully configured, the address will be copied to the rom file (ZyNOS |
|
| configuration file). It will not change unless you change the setting or upload a |
|
| different ROM file. |
|
|
|
| Set WAN MAC | Select this option and enter the MAC address you want to use. |
| Address |
|
|
|
|
| Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
6.5 Advanced WAN Screen
To change your ZyXEL Device’s advanced WAN settings, click Network > WAN > Advanced. The screen appears as shown.
Figure 54 WAN > Advanced
| 97 |
ZyXEL | |
|
|