Chapter 6 WAN
Table 33 PPPoE Encapsulation
LABEL | DESCRIPTION |
Retype to | Type your password again to make sure that you have entered is correctly. |
Confirm |
|
|
|
Select | |
Connection |
|
|
|
Idle Timeout | This value specifies the time in seconds that elapses before the router |
| automatically disconnects from the PPPoE server. |
|
|
WAN IP Address Assignment | |
|
|
Get automatically | Select this option If your ISP did not assign you a fixed IP address. This is the |
from ISP | default selection. |
|
|
Use Fixed IP | Select this option If the ISP assigned a fixed IP address. |
Address |
|
|
|
My WAN IP | Enter your WAN IP address in this field if you selected Use Fixed IP Address. |
Address |
|
|
|
Remote IP | Enter the remote IP address (if your ISP gave you one) in this field. |
Address |
|
|
|
Remote IP | Enter the remote IP subnet mask in this field. |
Subnet Mask |
|
|
|
DNS Servers |
|
|
|
First DNS Server | Select From ISP if your ISP dynamically assigns DNS server information (and the |
Second DNS | ZyXEL Device's WAN IP address). The field to the right displays the |
Server | DNS server IP address that the ISP assigns. |
Third DNS Server | Select |
| server's IP address in the field to the right. If you chose |
| the IP address set to 0.0.0.0, |
| Apply. If you set a second choice to |
| address, the second |
| Select None if you do not want to configure DNS servers. If you do not configure a |
| DNS server, you must know the IP address of a computer in order to access it. |
|
|
WAN MAC | The MAC address section allows users to configure the WAN port's MAC address |
Address | by using the ZyXEL Device’s MAC address, copying the MAC address from a |
| computer on your LAN or manually entering a MAC address. |
|
|
Factory default | Select Factory default to use the factory assigned default MAC Address. |
|
|
Clone the | Select Clone the computer's MAC address - IP Address and enter the IP |
computer’s MAC | address of the computer on the LAN whose MAC you are cloning. Once it is |
address | successfully configured, the address will be copied to the rom file (ZyNOS |
| configuration file). It will not change unless you change the setting or upload a |
| different ROM file. |
|
|
Set WAN MAC | Select this option and enter the MAC address you want to use. |
Address |
|
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
94 |
| |
ZyXEL |
| |
|
|
|