ZyXEL Communications NBG334SH 185

Chapter 18 Logs

Table 85 ICMP Notes (continued)

TYPE	CODE	DESCRIPTION
	2	Redirect datagrams for the Type of Service and Network
	3	Redirect datagrams for the Type of Service and Host
8		Echo
	0	Echo message
11		Time Exceeded
	0	Time to live exceeded in transit
	1	Fragment reassembly time exceeded
12		Parameter Problem
	0	Pointer indicates the error
13		Timestamp
	0	Timestamp request message
14		Timestamp Reply
	0	Timestamp reply message
15		Information Request
	0	Information request message
16		Information Reply
	0	Information reply message

Table 86 Syslog Logs

	LOG MESSAGE	DESCRIPTION
	<Facility*8 + Severity>Mon dd	"This message is sent by the system ("RAS" displays as
	hr:mm:ss hostname	the system name if you haven’t configured one) when the
	src="<srcIP:srcPort>"	router generates a syslog. The facility is defined in the web
	dst="<dstIP:dstPort>"	MAIN MENU->LOGS->Log Settings page. The severity is
	dst="<dstIP:dstPort>"	the log’s syslog class. The definition of messages and
	msg="<msg>" note="<note>"	the log’s syslog class. The definition of messages and
	msg="<msg>" note="<note>"	notes are defined in the various log charts throughout this
	devID="<mac address last three	appendix. The “devID” is the last three characters of the
	numbers>" cat="<category>	MAC address of the router’s LAN port. The “cat” is the
		same as the category in the router’s logs.

The following table shows RFC-2408 ISAKMP payload types that the log displays. Please refer to the RFC for detailed information on each type.

Table 87 RFC-2408 ISAKMP Payload Types

LOG DISPLAY	PAYLOAD TYPE
SA	Security Association
PROP	Proposal
TRANS	Transform
KE	Key Exchange
ID	Identification
CER	Certificate
CER_REQ	Certificate Request
HASH	Hash

	185
ZyXEL NBG-334SH User’s Guide	185