Chapter 14 Bandwidth Management
Figure 80 Bandwidth Management Rule Configuration:
The following table describes the labels in this screen.
Table 59 Bandwidth Management Rule Configuration:
LABEL | DESCRIPTION |
# | This is the number of an individual bandwidth management rule. |
|
|
Enable | Select an interface’s check box to enable bandwidth management on that |
| interface. |
|
|
Direction | These |
| management applies to all traffic flowing out of the router through the interface, |
| regardless of the traffic’s source. |
| Traffic redirect or IP alias may cause |
| ZyXEL Device and be managed by bandwidth management. |
|
|
Bandwidth | Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum |
| or minimum bandwidth allowed for the rule in kilobits per second. |
|
|
Destination Port | This is the port number of the destination. See Table 55 on page 140 for some |
| common services and port numbers. |
|
|
Source Port | This is the port number of the source. See Table 55 on page 140 for some |
| common services and port numbers. |
|
|
Protocol | This is the protocol (TCP or UDP) used for the service. |
|
|
OK | Click OK to save your customized settings. |
|
|
Cancel | Click Cancel to exit this screen without saving. |
|
|
In addition to the
| 145 |
ZyXEL | |
|
|