Chapter 4 Connection Wizard
4.2.2 Domain Name
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name (System Name) on each individual computer, the domain name can be assigned from the ZyXEL Device via DHCP.
Click Next to configure the ZyXEL Device for Internet access.
Figure 27 Wizard Step 1: System Information
The following table describes the labels in this screen.
Table 8 Wizard Step 1: System Information
LABEL | DESCRIPTION |
System Name | System Name is a unique name to identify the ZyXEL Device in an Ethernet network. |
| Enter a descriptive name. This name can be up to 30 alphanumeric characters long. |
| Spaces are not allowed, but dashes |
|
|
Domain Name | Type the domain name (if you know it) here. If you leave this field blank, the ISP may |
| assign a domain name via DHCP. The domain name entered by you is given priority |
| over the ISP assigned domain name. |
|
|
Back | Click Back to display the previous screen. |
|
|
Next | Click Next to proceed to the next screen. |
|
|
Exit | Click Exit to close the wizard screen without saving. |
|
|
4.3 Connection Wizard: STEP 2: Wireless LAN
Set up your wireless LAN using the following screen.
| 57 |
ZyXEL | |
|
|