Chapter 3 Introducing the Web Configurator
3.5.3 Summary: Packet StatisticsClick the Packet Statistics (Details...) hyperlink in the Status screen.
Figure 22 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 6 Summary: Packet Statistics
LABEL | DESCRIPTION |
Port | This is the ZyXEL Device’s port type. |
|
|
Status | For the LAN ports, this displays the port speed and duplex setting or Down |
| when the line is disconnected. |
| For the WAN port, it displays the port speed and duplex setting if you’re using |
| Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) |
| and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This |
| field displays Down when the line is disconnected. |
| For the WLAN, it displays the maximum transmission rate when the WLAN is |
| enabled and Down when the WLAN is disabled. |
|
|
TxPkts | This is the number of transmitted packets on this port. |
|
|
RxPkts | This is the number of received packets on this port. |
|
|
Collisions | This is the number of collisions on this port. |
|
|
Tx B/s | This displays the transmission speed in bytes per second on this port. |
|
|
Rx B/s | This displays the reception speed in bytes per second on this port. |
|
|
Up Time | This is the total amount of time the line has been up. |
|
|
System Up Time | This is the total time the ZyXEL Device has been on. |
|
|
Poll Interval(s) | Enter the time interval for refreshing statistics in this field. |
|
|
Set Interval | Click this button to apply the new poll interval you entered in the Poll Interval(s) |
| field. |
|
|
Stop | Click Stop to stop refreshing statistics, click Stop. |
|
|
Click the WLAN Station Status (Details...) hyperlink in the Status screen. View the wireless stations that are currently associated to the ZyXEL Device in the Association List screen.
50 |
| |
ZyXEL |
| |
|
|
|