Chapter 5 Wireless LAN

 

Table 29 Wireless LAN Advanced

 

LABEL

DESCRIPTION

 

802.11 Mode

Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate

 

 

with the ZyXEL Device.

 

 

Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate

 

 

with the ZyXEL Device.

 

 

Select 802.11b/g to allow either IEEE802.11b or IEEE802.11g compliant WLAN

 

 

devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL

 

 

Device might be reduced.

 

 

 

 

Super G Mode

Use this field to enable or disable the Super G function. Super G mode is available

 

 

only if you select 802.11g or 802.11b/g in the 802.11 Mode field.

 

 

Super G provides higher data transmission rates than 802.11g.

 

 

Select Disabled if your wireless clients do not support Super G.

 

 

Select Super G with Dynamic Turbo if some or all of your wireless clients support

 

 

Super G with Dynamic Turbo. Dynamic Turbo uses two channels bonded together to

 

 

achive higher transmission rates than 802.11g or Super G without Dynamic Turbo.

 

 

Dynamic turbo is on only when all wireless devices on the network support it. The

 

 

wireless channel is automatically fixed at 6 if you select this mode.

 

 

Select Super G without Turbo if the wireless clients on your network support Super

 

 

G but do not support dynamic turbo.

 

 

 

 

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

 

 

Reset

Click Reset to reload the previous configuration for this screen.

 

 

 

5.7 Quality of Service (QoS) Screen

The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a priority level.

Click Network > Wireless LAN > QoS. The following screen appears.

 

85

ZyXEL NBG-334SH User’s Guide