Chapter 14 Bandwidth Management
The following table describes the labels in this screen.
Table 57 Bandwidth Management: General
LABEL | DESCRIPTION |
Enable Bandwidth | Select this check box to have the ZyXEL Device apply bandwidth management. |
Management | Enable bandwidth management to give traffic that matches a bandwidth rule |
| priority over traffic that does not match a bandwidth rule. |
| Enabling bandwidth management also allows you to control the maximum or |
| minimum amounts of bandwidth that can be used by traffic that matches a |
| bandwidth rule. |
|
|
Enable Automatic | This field is only applicable when you select the Enable Bandwidth |
Traffic Classifier | Management check box. |
| Select this check box to have the ZyXEL Device base on the default bandwidth |
| classes to apply bandwidth management. |
| traffic always get higher priority. |
|
|
Apply | Click Apply to save your customized settings. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
14.9 Bandwidth Management Advanced Configuration
Click Management > Bandwidth MGMT > Advanced to open the bandwidth management
Advanced screen.
Figure 79 Bandwidth Management: Advanced
| 143 |
ZyXEL | |
|
|