Chapter 3 Introducing the Web Configurator
Table 3 Web Configurator Status Screen (continued)
LABEL | DESCRIPTION |
- Configuration Mode | This shows whether the advanced screens of each feature are turned on |
| (Advanced) or not (Basic). |
|
|
Interface Status |
|
|
|
Interface | This displays the ZyXEL Device port types. The port types are: WAN, LAN and |
| WLAN. |
|
|
Status | For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up |
| or connected). |
| For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN |
| is disabled. |
|
|
Rate | For the LAN ports, this displays the port speed and duplex setting or N/A when the |
| line is disconnected. |
| For the WAN port, it displays the port speed and duplex setting if you’re using |
| Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and |
| Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field |
| displays N/A when the line is disconnected. |
| For the WLAN, it displays the maximum transmission rate when the WLAN is |
| enabled and N/A when the WLAN is disabled. |
|
|
Summary |
|
|
|
Any IP Table | Use this screen to view details of IP addresses assigned to devices not in the same |
| subnet as the ZyXEL Device. |
|
|
BW MGMT Monitor | Use this screen to view the ZyXEL Device’s bandwidth usage and allotments. |
|
|
DHCP Table | Use this screen to view current DHCP client information. |
|
|
Packet Statistics | Use this screen to view port status and packet specific statistics. |
|
|
WLAN Station Status | Use this screen to view the wireless stations that are currently associated to the |
| ZyXEL Device. |
|
|
After you enter the password, use the
The following table describes the
Table 4 Screens Summary
LINK | TAB | FUNCTION | |
Status |
| This screen shows the ZyXEL Device’s general device, system and | |
|
| interface status information. Use this screen to access the wizard, | |
|
| and summary statistics tables. | |
|
|
| |
Network |
|
| |
|
|
| |
Wireless | General | Use this screen to configure wireless LAN. | |
LAN |
|
| |
MAC Filter | Use the MAC filter screen to configure the ZyXEL Device to block | ||
| |||
|
| access to devices or block the devices from accessing the ZyXEL | |
|
| Device. | |
|
|
| |
| Advanced | This screen allows you to configure advanced wireless settings. | |
|
|
| |
| QoS | Use this screen to configure | |
|
| (WMM QoS). WMM QoS allows you to prioritize wireless traffic | |
|
| according to the delivery requirements of individual services. | |
|
|
|
46 |
| |
ZyXEL |
| |
|
|
|