ZyXEL Communications NBG334SH Product Specifications

The following tables summarize the ZyXEL Device’s hardware and firmware features.

Table 91 Hardware Features

Dimensions (W x D x H)	190 x 128 x 33 mm

Power Specification	12 V AC 1 A

Ethernet ports	Auto-negotiating:
	This auto-negotiation feature allows the ZyXEL Device to detect the speed
	of incoming transmissions and adjust appropriately without manual
	intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either
	half-duplex or full-duplex mode depending on your Ethernet network.
	Auto-crossover:
	Use either crossover or straight-through Ethernet cables.

4-Port Switch	A combination of switch and router makes your ZyXEL Device a cost-
	effective and viable network solution. You can add up to four computers to
	the ZyXEL Device without the cost of a hub. Add more than four computers
	to your LAN by using a hub.

Reset Button	The reset button is built into the rear panel. Use this button to restore the
	ZyXEL Device to its factory default settings.

Antenna	The ZyXEL Device is equipped with a 2dBi fixed antenna to provide clear
	radio transmission and reception on the wireless network.

Operation Temperature	0º C ~ 50º C

Storage Temperature	-20º C ~ 60º C

Operation Humidity	20% ~ 95% RH

Storage Humidity	10% ~ 90% RH

Distance between the	125 mm
centers of the holes on
the device’s back.

Screw size for wall-	M 3*10
mounting

Table 92 Firmware Features

FEATURE	DESCRIPTION
Default IP Address	192.168.1.1

Default Subnet Mask	255.255.255.0 (24 bits)

Default Password	1234

DHCP Pool	192.168.1.33 to 192.168.1.64

Device Management	Use the web configurator to easily configure the rich range of features on
	the ZyXEL Device.