Chapter 15 Remote Management Screens
The following table describes the labels in this screen.
Table 62 WWW Remote Management
LABEL | DESCRIPTION |
Server Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
|
|
Server Access | Select the interface(s) through which a computer may access the ZyXEL Device |
| using this service. |
|
|
Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the |
Address | ZyXEL Device using this service. |
| Select All to allow any computer to access the ZyXEL Device using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the ZyXEL Device using this service. |
|
|
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
15.3 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next. The administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.
Figure 84 Telnet Configuration on a TCP/IP Network
15.4 Telnet Screen
To change your ZyXEL Device’s Telnet settings, click Management > Remote MGMT > Telnet. The following screen displays.
| 151 |
ZyXEL | |
|
|