Chapter 7 Wireless LAN
P-660HWP-Dx User’s Guide
44
7.4.4 WPA/WPA2

In order to configure and enable WPA/WPA2; click the Wireless LAN link under Network to

display the General screen. Select WPA or WPA2 from the Security Mode list.

Figure 66 Wireless: WPA/WPA2
Group Key
Update Timer (In
Seconds)
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA(2) key
management) sends a new group key out to all clients. The re-keying process is
the WPA(2) equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer
is also supported in WPA-PSK/WPA2-PSK mode. The default is 1800 seconds
(30 minutes).
Apply Click Apply to save your changes to the P-660HWP-Dx.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced Setup Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
Table 35 Wireless: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION