Chapter 3 Wizard Setup for Internet/Wireless Access
P-660HWP-Dx User’s Guide
46
"The wireless stations and P-660HWP-Dx must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is enabled)
for wireless communication.
4This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click Next.

3.3.1 Manually assign a WPA-PSK key

Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre-
Shared Key.
Figure 35 Manually assign a WPA key
The following table describes the labels in this screen.

3.3.2 Manually assign a WEP key

Choose Manually assign a WEP key to setup WEP Encryption parameters.
Table 15 Manually assign a WPA key
LABEL DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive English keyboard characters. You can set up the
most secure wireless connection by configuring WPA in the wireless LAN screens. You
need to configure an authentication server to do this.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.